Instruction 1

	Hold the start number together with the outer half of a fixpoint on one of the upper corners (ca. 2-3cm from the edge).		In order to make the start number lie flat, hold it at a corner, pull the shirt fabric inwards, then carefully push the fixpoints outwards again while holding the number in the middle. To push the fixpoint back towards the middle, lift the number at the corner.
	Then fix it with the inner half of the fixpoint under your shirt. Now check that the start number is correctly positioned (10cm from the bottom of your running clothing).		Now attach the other two fixpoints.
	Try to keep the shirt flat and uncreased while applying the 2nd fixpoint to the remaining upper corner.		That's it!
	If necessary adjust the position now, by holding the shirt and pulling the start number into place.		In the case of running jackets with pockets, insert the inner fixpoints in the pocket.

Instructions Video (German)

Instruction 2

Attach the fixpoints without the startnumber on your runningshirt and infix the number then. For that purpose please size the fixpoints before with the aid of the number. By including the number take off the outer fixpoint and hold the inner fixpoint by pressing at the same time.

Change top

To start up the cover, press down the edge of the fixpoint. Please consider, that the magnets are hold by the tops in the outer fixpoints. If you remove the magnets, reinsert them with the correct pole upwards. Afterwords click the cover all around the fixpoint.